Project Clean Water

A Water Quality Resource for the San Diego Region

  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator

Final Model BMP Design Manual for San Diego Region

The San Diego County Copermittees have developed a Model BMP Design Manual for the San Diego Region to conform to new development requirements of the 2013 Municipal Storm Water Permit (Order No. R9-2013-0001). The Model BMP Design Manual provides procedures for planning, selecting and designing onsite structural BMPs for new development and significant redevelopment projects in accordance with Provision E.3 of the 2013 Permit. Additionally, the Regional Manual provides a basis for the development of local BMP Design Manuals by each Stormwater Copermittee in the San Diego region.


Each Copermittee must update its local BMP Design Manual in accordance with the content of the regional Model on or before the February 16, 2016 effective date of the updated requirements of the 2013 Permit. The final Model BMP Design Manual and appendices are attached below, along with applicable supporting documentation and resources.

 

FEBRUARY 2016 MODEL BMP DESIGN MANUAL AND APPENDICES FOR SAN DIEGO REGION

POTENTIAL CRITICAL COARSE SEDIMENT YIELD AREAS MAP (From Regional WMAA)

HMP EXEMPTION MAPPING (From Regional WMAA)

MODEL BMP DESIGN MANUAL ONLINE HELP DESK (email support)

SUMMARY ON MANNING'S "N" VALUES FOR OVERLAND FLOW USING EPA SWMM V.5

WHITE PAPER ON MANNING"S "N" VALUES FOR OVERLAND FLOW USING EPA SWMM V.5

 

NEW BMP Sizing Spreadsheet Version 2.0 

Attachments:
Download this file (BMP Sizing Spreadsheet V2.0.xlsx)BMP Sizing Spreadsheet V2.0[A tool offered to assist the public with permit compliance by calculating BMP sizing.]2837 Kb

A new, more intuitive and easier to use BMP Sizing Spreadsheet is now available for download.

BMP Sizing Spreadsheet User Guide

The user’s guide provides instructions on how to use the BMP Sizing Spreadsheet. Please note that the user’s guide was prepared for the previous version of the BMP Sizing Spreadsheet (V1.04). The guide contains much useful information, especially for those completing the spreadsheet for the first time, relevant to properly completing the current BMP Sizing Spreadsheet.

San Diego BMP Sizing Calculator Methodology

For additional information contact the jurisdiction your project is located in.

 

Notes:

• This BMP Sizing Spreadsheet is a tool offered to assist the public with permit compliance, but its use is not intended to guarantee or warrant compliance, which is the independent responsibility of the user. In no event will the San Diego area municipal Copermittees be liable for any incidental, special or consequential damages of any kind (including, but not limited to, loss of information or other monetary loss) arising in any way in connection with the use or inability to use the BMP Sizing Calculator accessed from this website.

Presentations

SDHM 3.0 User Workshop Morning Session May 2016

 

SDHM 3.0 User Workshop Afternoon Session May 2016

 

Archive: June 2015 Version of Model BMP Design Manual

JUNE 2015 MODEL BMP DESIGN MANUAL FOR SAN DIEGO REGION (PDF)

FINAL MODEL BMP DESIGN MANUAL FOR SAN DIEGO REGION -- Appendices (PDF)

RESPONSE TO PUBLIC COMMENTS ON DRAFT MODEL BMP MANUAL FOR SAN DIEGO REGION

SAN DIEGO REGIONAL BOARD COMMENT LETTER

 

To view jurisdiction-specific information, please visit the Development Standards page.

SUMMARY ON MANNING'S "N" VALUES FOR OVERLAND FLOW USING EPA SWMM V.5

You are here: Home